– VISIT OUR ERGONOMIC PRODUCTS HOME PAGE –

Workbench Accessories– Lift Kits (INTERNAL) to Build or Retrofit your Own Ergonomic Aluminum Extrusion Frame Tables…

– Great Industrial Duty, Ergonomic Table Lift Kits…

Standard (1,000# max.) &Medium (1,500# max.) models available…

Features:

  • Easily mounts inside most 3″x 3″ extruded aluminum profiles.
  • Internally mounted cylinder neatly hides away unwanted outside obstructions.
  • Perfect application for OEMs and Custom Machine Builders.
  • Adjustment ranges available in: 6″, 8″, 10″& 12″ stroke.
  • Lifting capacities up to 1,500 lbs (Heavy Duty).
  • Single acting cylinders, power up and gravity down. Requires appx. 20 lbs. of weight per cylinder to retract properly.
  • Design Guidelines:
    • Tubing Bend Radius is 1-1/2″ min.
    • Duty Cycle for electric motors is typically is one (1) minute ON with five (5) minutes OFF rest time.
    • Uneven Loads are OK, as long as the minimum load to retract the legs is applied to each leg AND the maximum load is not exceeded for each leg.
    • Durability Testing – Unit design has been tested to meet or exceed 30,000 cycles.
    • Lift Speed for 1,000 lb systems is five (5) turns of the hand crank for one (1) inch of travel.  35 seconds total travel time for 12″lift, electric motor.
    • Lift Speed for 1,500 lb systems is ____ (__) turns of the hand crank for one (1) inch of travel.  42 seconds total travel time for 12″lift, electric motor.

FILL INFORMATION BELOW & CLICK "…CART" BUTTON AT BOTTOM

NOTE: * = Required
Please Wait a Few Seconds While We Process Your Request…