– Factory – Direct / Workbench Manufacturer –

Cart Model MC-107P-SS-PTCSTR – Stainless Steel Cart w/ Hydraulic Lift & Part-Time Casters

– Stainless Steel Adjustable Height Cart…

  • Standard Sizes (To be Entered Below):
    • We are the manufacturer…
    • Feel free to specify your custom dimension below or choose from the following:
    • WIDTH “A” – 48″, 60″ & 72″ Width (Right-to-Left)
      • Visit our Large Table page for more sizes…
      • Minimum Top/Unit Width & Depth (Required to Accommodate Hydraulic System):
        • Electric Motor Hydraulic System:
          • 6″ Lift – 28″ Min. Width
          • 8″ Lift – 30″ Min. Width
          • 10″ Lift – 32″ Min. Width
          • 12″ Lift – 34″ Min. Width
          • 16″ Lift – 38″ Min. Width
        • Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
          • NOTE: Hand Crank folds beneath work surface…
          • 6″ Lift – 15″ Min. Width or Depth
          • 8″ Lift – 17″ Min. Width or Depth
          • 10″ Lift – 20″ Min. Width or Depth
          • 12″ Lift – 22″ Min. Width or Depth
          • 16″ Lift – 26″ Min. Width or Depth
    • DEPTH “B” – 30″ & 36″ Depth (Front-to-Back)
    • HEIGHT “C” – 30″ (Sitting “Desk” Height), 34″ (ADA/Accessible Height), 36″ (Standing Tasks)

This Unit shown with Optional Part-Time Casters:

Standard Cart Features…

  • More Costly than our Typical Carbon Steel Frame Construction…
  • PART-TIME Industrial-Duty Casters (Wheels for Mobility) – Casters Raise with Frame
    • Table is in Fixed Position when Raised.
    • Leveling Feet glide along floor and must be manually raised (max. 1/2″ clearance) to roll over uneven floor surfaces.
  • Ergonomic Height Adjustability (Options)
    • Hydraulic-Assisted Height Adjustment w/ Electric Motor or Hand Crank
      • Hand Crank is mounted below work surface (Front or Side)
      • Switch for Electric Motor Option Unit can be positioned anywhere on the unit…
      • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
      • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
      • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
      •   – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
      • UL approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
      • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
    • Manually-Adjusted Height Option w/ Leg Pins – See Table Model MC-109P-SS-PIN
  • Durable Stainless Steel Frame Construction w/ Lower Crossmember (Can be used as a footrest)
    • Welded Tubular Steel Frame Connections
    • Type 304 Stainless Steel Construction
    • Type 316 Stainless Steel Construction available as option – Used in highly corrosive environments – More Expensive $$$
  • Other Styles Available – See Our Stainless Steel Carts page…
  • Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD / Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More…
  • Designed for Many Applications:
    • General Use…
    • Food Preparation
    • Cleanrooms…

This model is part of the RDM Industrial Carts standard models.


CUSTOMIZE YOUR OWN TABLE BY FOLLOWING SIMPLE STEPS

NOTE: * = Required
Please Wait a Few Seconds While We Process Your Request…