Standard Dual Stage Hydraulic Lift Table Features…

• Dual-Stage Lift Provides Additional Height AND Speed !!
• More Costly than our Typical Carbon Steel Frame Construction…
• Ergonomic Table Height Adjustability (Options)
  • Hydraulic-Assisted Height Adjustment w/ Electric Motor or Hand Crank
    • Hand Crank is mounted below work surface (Front or Side)
    • Switch for Electric Motor Option Unit can be positioned anywhere on the unit…
    • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
    • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
    • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
    •   – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
    • UL approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
    • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
  • Manually-Adjusted Height Option w/ Leg Pins – See Table Model A-109P-PIN
• Durable Stainless Steel Frame Construction w/ Lower Crossmember (Can be used as a footrest)
  • Welded Tubular Steel Frame Connections
  • Type 304 Stainless Steel Construction
  • Type 316 Stainless Steel Construction available as option – Used in highly corrosive environments – More Expensive $$$
• Other Styles Available – See Our Stainless Steel Tables page…
  • Also See Our Adjustable Height Tables  page…
  • Also See Our Laboratory Tables page…
• Adjustable Leveling Feet.  Casters available as option – See below…
• Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD / Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More…
• Dual Stage Hydraulic Lift Table is Designed for Many Applications:
  • General Use…
  • Food Preparation
  • Cleanrooms…

This model is part of the RDM Industrial Workbenches standard models.

The post Table Model <span style="color: #800000;"><strong>A-107P-DSTG-SS</strong></span> – <span style="color: #006ab6;"> Stainless Steel </span> Dual Stage Hydraulic Lift Table appeared first on RDM Industrial Products.

• Ergonomic ADA Lift Table / Accessible Table with Height Adjustability
  • Industrial-Duty – NOT Office Furniture
  • Hydraulic-Assisted Height Adjustment w/ Electric Motor or Hand Crank
    • 1,000 pound capacity – 4 Leg Unit (Less Weight of Top)
    • Switch for Electric Motor Unit can be positioned anywhere on the unit…
    • Hand Crank is mounted below work surface (Front or Side)
  • Manually-Adjusted Height Option w/ Leg Pins – See Table Model A-109P…
  • Swivel Levelers or Optional Casters (Wheels)
• Other Styles Available – See Our Adjustable Height Tables  page…
  • Also See Our Laboratory Tables page…
• Standard Sizes:
  • We are the manufacturer…
  • Feel free to specify your custom dimension requirements below or choose from the following…
  • “A” – 48″, 60″ & 72″ Width (Right-to-Left)
    • Minimum Top/Unit Widths (Required to Accommodate Hydraulic System):
      • Electric Motor Hydraulic System:
        • 12″ Lift – 34″ Min. Width
      • Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
        • 12″ Lift – 22″ Min. Width or Depth
  • “B” – 36″ Depth (Front-to-Back)
  • “C” – Adjustable (ADA Lift Table/Accessible Height)
    • 30″(29.875″) Starting Height with Levelers
    • 32.375″ Starting Height With Casters.
    • Custom Start Height Possible – Request in Comments
• Durable Steel Top Frame with Telescoping Aluminum Legs & Steel Base Legs
  • Welded Tubular Steel Frame Connections for Non-Adjustable Components
• Adjustable Leveling Feet.  Casters available as option – See below…
• See our Cleanroom Workbench Section for Electropolished Stainless Steel Tables…
• Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD / Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More…

This model is part of the RDM Industrial Workbenches standard models.

The post Table Model <span style="color: #800000;"><strong>i-107P-ADA</strong></span> – ADA Lift Table appeared first on RDM Industrial Products.

Stainless Steel Center Leg Lift Table Features…

• More Costly than our Typical Carbon Steel Frame Construction…
• Ergonomic Table Height Adjustability (Options)
  • Hydraulic-Assisted Height Adjustment w/ Electric Motor or Hand Crank
    • Hand Crank is mounted below work surface (Front or Side)
    • Switch for Electric Motor Option Unit can be positioned anywhere on the unit…
    • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
    • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
    • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
    •   – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
    • UL approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
    • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
  • Manually-Adjusted Height Option w/ Leg Pins – See Table Model A-109P-PIN
• Durable Stainless Steel Frame Construction w/ Lower Crossmember (Can be used as a footrest)
  • Welded Tubular Steel Frame Connections
  • Type 304 Stainless Steel Construction
  • Type 316 Stainless Steel Construction available as option – Used in highly corrosive environments – More Expensive $$$
• Other Styles Available – See Our Stainless Steel Tables page…
  • Also See Our Adjustable Height Tables  page…
  • Also See Our Laboratory Tables page…
• Adjustable Leveling Feet.  Casters available as option – See below…
• Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD / Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More…
• Designed for Many Applications:
  • General Use…
  • Food Preparation
  • Cleanrooms…

This Stainless Steel Center Leg Lift Table model is part of the RDM Industrial Workbenches standard models.

The post Table Model <span style="color: #800000;"><strong>A-107P-SS-CLG</strong></span> – <span style="color: #006ab6;"> Stainless Steel </span> Workbench w/ Center Legs & Hydraulic Lift appeared first on RDM Industrial Products.

• Ergonomic ADA Table with Height Adjustability (Options)
  • Hydraulic-Assisted Height Adjustment w/ Electric Motor or Hand Crank
    • 1,000 pound capacity Lift System – 4 Leg Unit (Less Weight of Top)
    • Switch for Electric Motor Unit can be positioned anywhere on the unit…
    • Hand Crank is mounted below work surface (Front or Side)
• Other Styles Available – See Our Adjustable Height Tables  page…
  • Also See Our Laboratory Tables page…
• i-Frame Adjustable Height Table Standard Sizes:
  • We are the manufacturer…
  • Feel free to specify your custom dimension requirements below or choose from the following…
  • “A” – 48″, 60″ & 72″ Width (Right-to-Left)
    • Minimum Top/Unit Widths (Required to Accommodate Hydraulic System):
      • Electric Motor Hydraulic System:
        • 12″ Lift – 34″ Min. Width
      • Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
        • 12″ Lift – 22″ Min. Width or Depth
  • “B” – 30″ & 36″ Depth (Front-to-Back)
  • “C” – 30″ (Sitting “Desk” Height), 34″ (ADA/Accessible Height), 36″ (Standing Tasks)
• Durable Steel Top Frame with Telescoping Aluminum Legs & Steel Base Legs
  • Welded Tubular Steel Frame Connections for Non-Adjustable Components
• Adjustable Leveling Feet.  Casters available as option – See below…
• See our Cleanroom Workbench Section for Electropolished Stainless Steel Tables…
• Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD / Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More…

This model is part of the RDM Industrial Workbenches standard models.

The post Table Model <span style="color: #800000;"><strong>i-107P-1000</strong></span> – i-Frame Adjustable Height Table – 1,000 lb Capacity Lift appeared first on RDM Industrial Products.

Standard Table Features…

• Adjustable Height Laboratory Table with Suspended Steel Cabinet(s)
• Other Styles Available – See Our Laboratory Tables page…
• Standard Sizes:
  • We are the manufacturer – Feel free to specify your custom dimension requirements below or choose from the following…
  • “A” – Width (Right-to-Left)
    • 54″(48″Cabinet Clearance)
    • 66″(60″ Cabinet Clearance)
    • 78″(72″ Cabinet Clearance)
    • 90″(84″ Cabinet Clearance)
    • 102″(96″ Cabinet Clearance)
    • 114″(108″ Cabinet Clearance or three 36″cabs)
  • “B” – 30″ & 36″ Depth (Front-to-Back)
  • “C” – 30″-42″ Adjustable Height using Leg Pins
• Durable Steel Frame Construction w/ Lower Crossmember (Can be used as a footrest)
  • Welded Tubular Steel Frame Connections for Non-Adjustable Components
• Adjustable Leveling Feet.  Casters available as option – See below…
• See our Cleanroom Workbench Section for Electropolished Stainless Steel Tables…
• Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD / Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More…

This Adjustable Height Laboratory Table model is part of the RDM Industrial Workbenches standard models.

The post Table Model <span style="color: #800000;"><strong>A-109P-LAB-PIN-CAB</strong></span> – Adjustable Height Laboratory Table with Suspended Steel Cabinet(s) appeared first on RDM Industrial Products.

Standard Ergonomic Adjustable Height Tilt Top Light Table Features…

• Work Surface is Illuminated from below…
• Mobile Ergonomic Table – Height Adjustable with Hydraulic Lift System
  • Hydraulic Height Adjustment w/ Electric Motor or Hand Crank
    • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
      • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
      • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
    • Hand Crank is mounted below work surface (Front or Side)
    • Switch for Optional Electric Motor Unit can be positioned anywhere on the unit…
    • UL Approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
    • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
    • – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
• Adjustable Height Tilt Top Light Table is available in the following configurations:
  • Manual Adjustment Support Brackets (50-100 lb max. load recommended)
  • Hydraulic Tilt with Manual Hand Crank (Standard 250 lb capacity up to 500 lb)
  • Hydraulic Tilt with Electric Motor (Same weight capacity as above…)
• Industrial-Duty Total-Locking Casters (Pivot & Wheel)
• Other Styles Available – See Our Adjustable Height Tables  page…
  • Manually-Adjusted Height Option w/ Leg Pins – See Table Model A-109P-PIN
  • Also See Our Laboratory Tables page…
• Standard & Custom Sizes:
  • We are the manufacturer…
  • Feel free to specify your custom dimension requirements or choose from the following…
  • “A” – WIDTH (Right-to-Left) 30″, 36″, 48″, 60″, 72″, & 96″
    • Minimum Top/Unit Widths (to Accommodate Hydraulic System):
      • Electric Motor Hydraulic System:
        • 6″ Lift – 28″ Min. Width
        • 8″ Lift – 30″ Min. Width
        • 10″ Lift – 32″ Min. Width
        • 12″ Lift – 34″ Min. Width
        • 16″ Lift – 38″ Min. Width
      • Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
        • Hand Crank folds beneath work surface…
        • 6″ Lift – 15″ Min. Width or Depth
        • 8″ Lift – 17″ Min. Width or Depth
        • 10″ Lift – 20″ Min. Width or Depth
        • 12″ Lift – 22″ Min. Width or Depth
        • 16″ Lift – 26″ Min. Width or Depth
  • “B” – DEPTH (Front-to-Back) 30″min., 36″, & 48″
  • “C” – HEIGHT Minimum Starting Height – Varies (Levelers/Casters):
    • 6″ Lift System – 22″/28″ Min. Start Height
    • 8″ Lift System – 24″/30″ Min. Start Height
    • 10″ Lift System – 26″/32″ Min. Start Height
    • 12″ Lift System – 28″/34″ Min. Start Height
    • 16″ Lift System – 30″/36″ Min. Start Height
    • 20″ Lift System – 32″/38″ Min. Start Height

The post Table Model <span style="color: #800000;"><strong>A-107P-LT-TILT</strong></span> – Adjustable Height Tilt Top Light Table appeared first on RDM Industrial Products.

Standard Lift / Tilt Table Features…

• Tilt Top Lift Table – Height Adjustable with Hydraulic Lift System
  • Hydraulic Height Adjustment w/ Electric Motor or Hand Crank
    • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
      • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
      • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
    • Hand Crank is mounted below work surface (Front or Side)
    • Switch for Optional Electric Motor Unit can be positioned anywhere on the unit…
    • UL Approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
    • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
    • – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
• Tilt Top is available in the following configurations:
  • Manual Adjustment Support Brackets (50-100 lb max. load recommended)
  • Hydraulic Tilt with Manual Hand Crank (Standard 250 lb capacity up to 500 lb)
  • Hydraulic Tilt with Electric Motor (Same weight capacity as above…)
• Industrial-Duty Total-Locking Casters (Pivot & Wheel)
• Other Styles Available – See Our Adjustable Height Tables  page…
  • Manually-Adjusted Height Option w/ Leg Pins – See Table Model A-109P-PIN
  • Also See Our Laboratory Tables page…
• Tilt Top Lift Table Standard Sizes:
  • We are the manufacturer…
  • Feel free to specify your custom dimension requirements below or choose from the following…
  • “A” – WIDTH (Right-to-Left) 30″, 36″, 48″, 60″, 72″, & 96″
    • Minimum Top/Unit Widths (to Accommodate Hydraulic System):
      • Electric Motor Hydraulic System:
        • 6″ Lift – 28″ Min. Width
        • 8″ Lift – 30″ Min. Width
        • 10″ Lift – 32″ Min. Width
        • 12″ Lift – 34″ Min. Width
        • 16″ Lift – 38″ Min. Width
      • Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
        • Hand Crank folds beneath work surface…
        • 6″ Lift – 15″ Min. Width or Depth
        • 8″ Lift – 17″ Min. Width or Depth
        • 10″ Lift – 20″ Min. Width or Depth
        • 12″ Lift – 22″ Min. Width or Depth
        • 16″ Lift – 26″ Min. Width or Depth
  • “B” – DEPTH (Front-to-Back) 30″min., 36″, & 48″
  • “C” – HEIGHT Minimum Starting Height – Varies:
    • 6″ Lift System – 16″ Minimum Starting Height
    • 8″ Lift System – 18″ Minimum Starting Height
    • 10″ Lift System – 20″ Minimum Starting Height
    • 12″ Lift System – 22″ Minimum Starting Height
    • 16″ Lift System – 26″ Minimum Starting Height
    • 20″ Lift System – 30″ Minimum Starting Height

The post Table Model <span style="color: #800000;"><strong>A-107P-TILT</strong></span> – Tilt Top Lift Table appeared first on RDM Industrial Products.

• Our Vertical Tilting Illuminated Light Panel Units are Designed for Heavy-Duty Long-Term Usage
• Standard Work Surface is a Translucent White Plastic Surface
  • Tempered Glass Top Cover available as an option, typically 1/4″
    • Typically rests directly onto lighted plastic surface.
    • Standoff option available for thicker glass top covers
    • Thicker Glass Top Covers available – 3/8″thick min. recommended for smaller tables (36×48 or less)
  • Frosted Glass is an Optional Alternative, but much more expensive
  • Lighted Area can be sized to match your specific needs (Multiples of 12″ for width)
• LED Lighting with Remote Dimmer Switch – We target
• All Lighting Components and Power Units are mounted on the inside of the light box.
• Can be Customized to accommodate any special needs…
• Other Styles Available – See Our Light Tables page…
• Standard & Custom Sizes:
  • We are the Manufacturer – Feel free to specify your custom dimension requirements

This Illuminated Light Panel model is part of the RDM Industrial Workbenches standard models.

RDM: For Light Tables That Actually Deliver

RDM offers a wide array of light tables, for different needs and purposes.

Our aim has and will always be about giving people the furniture solutions that they need and want. As it is, you can rest assured that our table options will not only have the qualities and features that you need, but many other advantages as well!

Interested?

Here are some additional things that you might want to know:

Durability

RDM only makes use of high-grade, high quality materials. That is a fact.

Why?

We have always taken pride in providing clients with the best furniture solutions that they have been looking for.

Our products, including our light table for drawing and many other furniture options—are made of industrial components, for added durability. In addition, they have been specifically designed for heavy duty and long term use, in order to ensure that people get the most out of their investment.

Features

Our drafting light tables are equipped with the needed features and qualities, such as:

• Fluorescent lighting with a dimmable feature.
• Frosted glass area that can be adjusted to match one’s specific requirements.
• Different top surfaces to choose from, including chemical-resistant surfaces, as well as plastic-laminated surfaces.
• Customizable features, depending on your specific preferences or needs.

The post Table Model <span style="color: #800000;"><strong>LT-100P</strong></span> – Tilting Illuminated Light Panel / Inspection Table appeared first on RDM Industrial Products.

Standard Table Features…

• Recessed Legs i-Frame Tech Styke Workbench w/ Fixed Upper Shelf
• Adjustable-Height Leg Pins for Manual Height Adjustment (12″ Range 30-42 Typ.)
• Fixed-Height Overhead Shelf for Added Surface Space / Storage
• Standard Sizes:
  • We are the manufacturer – Feel free to specify your custom dimension requirements below or choose from the following…
  • “A” – 48″, 60″ & 72″ Width (Right-to-Left)
  • “B” – 30″ & 36″ Depth (Front-to-Back)
  • “C” – 30″ (Sitting “Desk” Height), 34″ (ADA/Accessible Height), 36″ (Standing Tasks)
  • “D” – 12″ to 18″
  • “E” – 18″ to 24″ (Add 3 1/2″ to your under-shelf clearance requirement)
• Durable Steel Frame Construction w/ Lower Crossmember (Can be used as a footrest)
  • Welded Tubular Steel Frame Connections for Non-Adjustable Components
• Adjustable Leveling Feet
• See our Cleanroom Workbench Section for Electropolished Stainless Steel Tables…
• Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD / Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More…
• Many Styles Available, Including:
  • Laboratory with Chemical Resistant Solid Surface Tops
  • ESD / Static Control with Grounding Ports & Hardware
  • Cleanroom, for use in Class 100 or Less
  • Heavy Manufacturing with Solid Steel Decks
  • General Use with Standard HPL Laminated Tops Channeled rear legs accept many workbench accessories…
• Optional Workstation Accessories:
  • Flat Monitor Stand & Keyboard Tray
  • Fixed or Articulating Bin Panel / Bin Rails
  • Utility & File Drawers
  • Storage Cabinets
  • Power Outlet Strip(s)
  • Tool Trolley w/ Balancer(s)
  • …and many more – please see below…

This model is part of the RDM Industrial Workbenches standard models.

The post Table Model <span style="color: #800000;"><strong>i-103P-PIN</strong></span> – Adjustable-Height i-Frame Tech Style Workbench w/ Fixed Upper Shelf appeared first on RDM Industrial Products.

• Durable Steel Frame Construction w/ Lower Crossmember
• Industrial-Duty Leg Pins
• Industrial-Duty Casters (Wheels for Mobility)
• Standard Sizes:
  • We are the manufacturer – Feel free to specify your custom dimension requirements
    above or choose from the following…
  • “A” – 48″, 60″ & 72″ Width (Right-to-Left)
  • “B” – 18″, 24″, 30″ & 36″ Depth (Front-to-Back)
  • “C” – 30″-42″ (Standard Height Range) – Custom Ranges Possible
• Industrial-Duty Casters (Wheels for Mobility)
• See our Cleanroom Cart Section for Electropolished Stainless Steel Carts…
• Many Top Options to Choose from including Plastic Laminate, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More…

This model is part of the RDM Industrial Carts standard models.

The post Cart Model <span style="color: #9900ff;"><strong>MC-109P-PIN</strong></span> <br> – Adjustable-Height Cart with Leg Pins… appeared first on RDM Industrial Products.